The file 'J1 Cooler And Stuffs 3D Printer Model' is (stp,3mf,plasticity,stl,blend) file type, size is 5.8MB.
ATTENTION!!
Any existing user should upgrade to the V2 design ASAP as the original design can cause Z binding. The newer design also provides a smoother air channel for increased efficiency.
V2 is now a 2 part assembly and need to be printed separately (J1_duct_2.0.3mf), the backplate and mount is still mirrorable (J1_duct_base).
This is a simple part cooler that can be printed for the J1. It is powered by 2 5015 fans, for detailed information visit my Snapmaker forum.
You can also find panels for buttons and ventilation + other accessories here.
Step and source files are included for you to customize. Enjoy :)
| Cable_tie.stp | 17.7KB | |
| Custom_Panel.3mf | 73.7KB | |
| Cutom_Front_and_Back_Panels.plasticity | 102.7KB | |
| Cutom_Front_and_Back_Panels.stp | 66.3KB | |
| J1_duct_2.0.3mf | 2.0MB | |
| J1_duct_base.3mf | 124.0KB | |
| J1_to_4mm_x_2mm_PTFE_adapter.3mf | 565.6KB | |
| J1_to_4mm_x_2mm_PTFE_adapter.stl | 1.8MB | |
| JI_Duct_V2.plasticity | 720.6KB | |
| Panel_Brace.3mf | 30.0KB | |
| Panel_Brace.stp | 31.6KB | |
| Vent.blend | 3.2MB | |
| Ventilated_Front.3mf | 407.8KB | |
| Ventilated_Front.stl | 1.8MB | |
| Ventilated_Front_Slider.stl | 219.8KB | |
| Volcano_Duct.3mf | 67.0KB | |
| Volcano_Duct.stp | 368.8KB |
