ITEM 4040 Hinge 3D Printer Model
The file 'ITEM 4040 Hinge 3D Printer Model' is (stl) file type, size is 7.2MB.
The file 'ITEM 4040 Hinge 3D Printer Model' is (stl) file type, size is 7.2MB.
This hinge for 4040 profiles was designed for a DIY laser cutter project.
It easily connects two ITEM profiles to each other, which can be attached with two M8 x 20mm inner square screws.
The joint can be rotated in a straight position 90° to the right & left. The screws can be used to regulate the effort needed to move the joint.
(+) very precise and form-fitting
(+) no twisting of the profiles
(+) high stability if the infill is increased accordingly
(-) only ITEM light profiles, otherwise all positive points will get worse
| Hinge1_with_NutM3_2x.stl | 1.0MB | |
| Hinge1_with_NutM3_2x_hole.stl | 1.1MB | |
| Hinge1_with_NutM3_4x.stl | 1.3MB | |
| Hinge1_with_NutM3_4x_hole.stl | 1.4MB | |
| Hinge1_with_NutM4_2x.stl | 1023.9KB | |
| Hinge1_with_NutM4_2x_hole.stl | 1.0MB | |
| Hinge1_with_NutM4_4x.stl | 1.4MB | |
| Hinge1_with_NutM4_4x_hole.stl | 1.4MB | |
| Hinge1_with_NutM5_2x_hole.stl | 1.0MB | |
| Hinge1_with_NutM5_4x_hole.stl | 1.3MB | |
| Hinge2_with_NutM3_2x.stl | 1.0MB | |
| Hinge2_with_NutM3_2x_hole.stl | 1.1MB | |
| Hinge2_with_NutM3_4x.stl | 1.4MB | |
| Hinge2_with_NutM3_4x_hole.stl | 1.4MB | |
| Hinge2_with_NutM4_2x.stl | 1.0MB | |
| Hinge2_with_NutM4_2x_hole.stl | 1.1MB | |
| Hinge2_with_NutM4_4x.stl | 1.5MB | |
| Hinge2_with_NutM4_4x_hole.stl | 1.6MB | |
| Hinge2_with_NutM5_2x_hole.stl | 1.0MB | |
| Hinge2_with_NutM5_4x_hole.stl | 1.3MB | |
| hinge_1.stl | 726.2KB | |
| hinge_2.stl | 763.8KB |
