Isuzu Trooper Window Clip 3D Printer Model
The file 'Isuzu Trooper Window Clip 3D Printer Model' is (stl) file type, size is 683.3KB.
The file 'Isuzu Trooper Window Clip 3D Printer Model' is (stl) file type, size is 683.3KB.
I created these for my 1998 Isuzu Trooper. Unsure which years they will fit. There are two versions, the original file I created I wanted the 10mm nut completely enclosed in the print, so I paused at the specific layer to insert the nut before continuing, I don't remember the exact nut size, but bring the original bolt to the store to find the right metric thread, then make sure the outside dimensions of the nut is 10mm. The other version just has a hole in the back so you can hold the nut in until you get the bolt installed, or use sticky tack to keep the nut in place. I used Silicone adhesive squeezed into the parts small window channel before installing onto the track, then i rolled up the window regulator so it clamped onto the window that was taped to the top of the door, then let it set for 24-48 hours to cure.
| Trooper_Window_Clip.stl | 1.1MB | |
| Trooper_Window_Clip_Nut_Encased.stl | 1.1MB |
