update 07.01.2018: uploaded sketch for back and helmet.
Here are my files for a complete Iron Man MK6 suit.
It looks great, but it is NOT comfortable.
And because it is halloweentime I added a battledamaged mask for the helmet.
Here is a video of the moving faceplate. Special thanks to "redeathray" for checking my code and helping me.
https://youtu.be/Wdb1UWU4UAY
https://youtu.be/P-KLNkn2KAA
https://youtu.be/ZY1E9p6GItU
The pictures show me trying out all parts.The electronics are not yet completed, but I think you are more interrested in the files.
One picture shows a small version of the MK6 helmet as battledamaged. I gonne use it as decoration for Halloween.
I prefere the MK3 helmet to wear. I like the look more.
You can download it from "jhon De Sousa" on the following link:
http://www.thingiverse.com/thing:260152
Most parts are founded on the following 24cm high Iron Man MK6 shell figure from "RohitVen". I asked him to rework and publish his files as a costume and he agreed to.
http://www.thingiverse.com/thing:1026995
The gloves are made of a Papakura file. The glove is originaly made by "zabana" and remixed by "darkside501st". Below the original link for the glove:
http://www.therpf.com/showthread.php?t=139470&highlight=hand+zabana
As arc reactor I used this Modell from "Thaurus":
http://www.thingiverse.com/thing:1377484
All parts were made for a Prusa I3 with a 220x220x240mm buildplate.
If you have any problems or find parts which are to big please contact me and I will do my best to change it.
Except of the printed parts, some buckles (printed or bought), elastic strap and a lot of soft foam for a little comfort you will need the following parts:
Helm: 4x M4 Bush, MG995 Servo, any arduinoor other micro controller, at least 8x LED white, 4x M4x10, 4x M3x20, 4x M3 nut, acrylglass, 2x contactor , (or 1x, depending on the sketch you use)
Neck: EVA foam for a comfortable and flexible neck (if you want to make a neck)
Chest: acrylglass 2x M4x40, 2x M4 nut,
ABS: EVA foam for a comfortable and flexible sideparts
Lower arm (each): some springs for a backflipping handplate, M4x20, M4 nut
Gloves (each): 4x LED White, 1x G4 COB LED spot, 1x contactor (to enable G4 COB as repulsor)
Hips: M4x25, M4 nut
Thigh: if you want the knee moving / flapping you will need four springs. I used a blow-dryer to make it a Little more comfortable, because they are really to narrow for my legs. But I could not resize them, because then they wont fit to the rest of the costume and it won't look good .
Shoe: a lot of foam to make it suitable.
Clipmount: it is made to attach the elastc strap. you will need a M4x25 and a M4 nut for each, you can connect the different parts by using a clips
It might be that some parts to not fit to your body. please check it bevor you print all.
I am about 1.8 meters high and I have a weight of 80kg. The following measures may help you:
head: 58cm
shoulders 53cm (from side to side)
chest: 105cm
waist: 90cm
hips: 104cm
If you got any questions feel free to ask and massage me.
I hope you enjoy it.
| ABS_hinge.stl | 599.7KB | |
| abs_pt1.stl | 25.5KB | |
| abs_pt2-1.stl | 22.6KB | |
| abs_pt2-2.stl | 20.9KB | |
| abs_pt3-1.stl | 22.7KB | |
| abs_pt3-2.stl | 21.0KB | |
| abs_pt4-1.stl | 20.1KB | |
| abs_pt4-2.stl | 21.9KB | |
| abs_pt5-1.stl | 17.0KB | |
| abs_pt5-2.stl | 15.6KB | |
| ARC-Window-Cover.stl | 8.1KB | |
| backsketch_1_button.ino | 1.1KB | |
| Back_for_flaps_L_pt01.obj | 922.3KB | |
| Back_for_flaps_L_pt02.obj | 8.0MB | |
| Back_for_flaps_L_pt03.obj | 1.9MB | |
| Back_for_flaps_L_pt04.obj | 641.4KB | |
| back_half_pt01.stl | 1.4MB | |
| back_half_pt02.stl | 488.4KB | |
| back_half_pt03.stl | 732.5KB | |
| back_half_pt04.stl | 822.8KB | |
| back_spine_pt1.stl | 159.0KB | |
| back_spine_pt2.stl | 1.4MB | |
| back_spine_pt3_3x.stl | 2.0MB | |
| biceps_L_pt1.stl | 1.2MB | |
| biceps_L_pt2.stl | 2.1MB | |
| calf_L_pt1.stl | 490.7KB | |
| calf_L_pt2.stl | 550.9KB | |
| calf_L_pt3.stl | 987.1KB | |
| calf_L_pt4.stl | 1.6MB | |
| calf_L_pt5.stl | 1.6MB | |
| calf_L_pt6.stl | 672.9KB | |
| calf_L_pt7.stl | 912.4KB | |
| chest_half_L_pt01.stl | 357.2KB | |
| chest_half_L_pt02.stl | 528.0KB | |
| chest_half_L_pt03.stl | 862.1KB | |
| chest_half_L_pt04.stl | 699.1KB | |
| chest_half_L_pt05.stl | 372.7KB | |
| Clipmount.stl | 80.9KB | |
| Flap_L_01.obj | 300.7KB | |
| Flap_L_02.obj | 164.2KB | |
| glove_R_pt01.stl | 616.7KB | |
| glove_R_pt02.stl | 132.2KB | |
| glove_R_pt03.stl | 588.2KB | |
| glove_R_pt04.stl | 728.2KB | |
| helm_bd_pt08.stl | 7.7MB | |
| helm_pt01.stl | 732.5KB | |
| helm_pt02.stl | 761.8KB | |
| helm_pt03.stl | 1.8MB | |
| helm_pt04.stl | 671.3KB | |
| helm_pt05.stl | 1.9MB | |
| helm_pt06.stl | 1.4MB | |
| helm_pt07.stl | 1.3MB | |
| helm_pt08.stl | 3.8MB | |
| helm_pt09.stl | 2.5MB | |
| hips_half_pt06.stl | 230.4KB | |
| hips_half_pt07.stl | 3.5MB | |
| hips_half_pt08.stl | 737.6KB | |
| hips_pt01.stl | 538.9KB | |
| hips_pt02.stl | 499.1KB | |
| hips_pt03.stl | 287.2KB | |
| hips_pt04.stl | 199.9KB | |
| hips_pt05.stl | 222.0KB | |
| IRONMAN_helmet.ino | 1.3KB | |
| Iron_Man_MK6.stl | 57.5MB | |
| knee_L_new.stl | 648.0KB | |
| lower_arm_L_pt1.stl | 1.8MB | |
| lower_arm_L_pt2.stl | 2.0MB | |
| lower_arm_L_pt3.stl | 1.7MB | |
| neck_pt1.stl | 1.4MB | |
| neck_pt2.stl | 854.3KB | |
| neck_pt3_L.stl | 3.2MB | |
| ribs_pt1.stl | 43.1KB | |
| ribs_pt2.stl | 31.2KB | |
| ribs_R_pt3.stl | 21.2KB | |
| ribs_R_pt4.stl | 18.8KB | |
| servomount_and_hinges_for_helmet.stl | 2.6MB | |
| shoe_L_pt1.stl | 3.4MB | |
| shoe_L_pt2.stl | 2.1MB | |
| shoulder_L.stl | 10.9MB | |
| shoulder_L_pt1.stl | 1.4MB | |
| shoulder_L_pt2.stl | 508.7KB | |
| shoulder_L_pt3.stl | 690.1KB | |
| shoulder_L_pt4.stl | 549.9KB | |
| shoulder_L_with_ballhinge.obj | 6.5MB | |
| thigh_L_pt1.stl | 952.5KB | |
| thigh_L_pt2.stl | 787.9KB | |
| thigh_L_pt3.stl | 1.3MB | |
| thigh_L_pt4.stl | 1017.8KB | |
| thigh_L_pt5.stl | 1.4MB | |
| thigh_L_pt6.stl | 1.1MB | |
| thigh_L_pt7.stl | 1.2MB | |
| thigh_L_pt8.stl | 1.1MB |
