18/06/19 The thingiverse member AlexKorvin made a very good make and an awesome video how to build it. You can see it here:
Hope this might help some of you building the faceplate.
Thanks to AlexKorvin.
17/04/2017 some parts changed for better Fittings
Stand with space for batteries added.
Well I saw Vash's Interieur on therpf.com, but I could not find the files anywhere.
So I decided to create my own. They are not as good as Vash's but I think they will do :-)
The mask is originally made by MIPRESIDENTE. Thingfiles here: http://www.thingiverse.com/thing:260152
I also putted two needed parts here for download.
One picture shows how the finished version should be.
I just created them to be printed without support. You will need a heat-blower to form them.
I used 3mm LED's for the eyes. The Eyes are printed Transparent and with 100% infill. The connector pins are simple microelectronic pins, which are normally used for arduinos or something similar. I took 12V voltage supply, but just because I got a 12V power pack.
I made 2 just to be printed. ist "part01-11" and "part12-17". You will also Need part 18 and the Stand, but I thought it would be easier to print These parts together. You will also Need to mirror all parts (1-18) one time, toget a full faceplate
What you need for the whole mask:
1xM4 screw with nut.
4x connector Pins (2x male, 2x female)
8x 3mm led
wires
resistor, depending on your supply voltage
power pack
Switch
Some black cloth or foam for the backround
Some old electronicparts to look cool down below in the center :-)
some lether (for the brown parts)
I am not ready with my paint Job. The Surface was sanded by a friend - Sven S. - thanks for that.
Hope you enjoy it. If you got any questions, feel free to ask.
| eyes_-_transparent.stl | 3.3KB | |
| Faceplate01.stl | 9.8MB | |
| Faceplate02.stl | 4.5MB | |
| pt01-11.stl | 3.6MB | |
| pt01.stl | 60.0KB | |
| pt02.stl | 373.8KB | |
| pt03.stl | 22.5KB | |
| pt04.stl | 22.3KB | |
| pt05.stl | 4.2KB | |
| pt06.stl | 68.0KB | |
| pt07.stl | 697.0KB | |
| pt08.stl | 56.6KB | |
| pt09.stl | 48.9KB | |
| pt10.stl | 1.1KB | |
| pt11.stl | 14.7KB | |
| pt12-17.stl | 10.3MB | |
| pt12.stl | 284.0KB | |
| pt13.stl | 1.1MB | |
| pt14.stl | 3.1KB | |
| pt15.stl | 2.1MB | |
| pt16.stl | 370.8KB | |
| pt17.stl | 830.0KB | |
| pt18.stl | 97.2KB | |
| Staender_pt01.stl | 2.4MB | |
| Staender_pt01_for_batteries.stl | 260.0KB | |
| Staender_pt02.stl | 126.0KB | |
| Staender_pt03.stl | 423.2KB | |
| Staender_pt04_for_batteries.stl | 31.9KB |
