Iron Man Mark VII – Wearable Helmet And Working Hinge System 3D Printer Model
The file 'Iron Man Mark VII – Wearable Helmet And Working Hinge System 3D Printer Model' is (pdf,ino,zip,stl) file type, size is 23.8MB.
The file 'Iron Man Mark VII – Wearable Helmet And Working Hinge System 3D Printer Model' is (pdf,ino,zip,stl) file type, size is 23.8MB.
Update 04/11/20 - Included a zip file of print chopped up for a 7x7x7" (180x180x180mm) Print bed.
Well here it is, the beginning of 2020 and I had done a little work on transforming 1.05 Iron Man MkVII Helmet by Darkside501st pepakura from a paper item to a printable 3D Item.
Please go to:
https://www.therpf.com/forums/threads/my-iron-man-mark-vii-helmet.328603/
For the full build process
| Ironmanhelmet_Board.pdf | 623.4KB | |
| Iron_Man_-_Moe.ino | 3.0KB | |
| MoeSizzlac_-_Ironman_Mark_VII_-_Helmet_Chopped_up_for_7x7x7.zip | 12.1MB | |
| MoeSizzlac_-_Ironman_Mark_VII_Helmet_-_Back.stl | 3.4MB | |
| MoeSizzlac_-_Ironman_Mark_VII_Helmet_-_Eye_-_Left.stl | 798.5KB | |
| MoeSizzlac_-_Ironman_Mark_VII_Helmet_-_Eye_-_Right.stl | 798.5KB | |
| MoeSizzlac_-_Ironman_Mark_VII_Helmet_-_FaceMount.stl | 111.2KB | |
| MoeSizzlac_-_Ironman_Mark_VII_Helmet_-_Face_Mask.stl | 4.5MB | |
| MoeSizzlac_-_Ironman_Mark_VII_Helmet_-_Jaw.stl | 3.1MB | |
| MoeSizzlac_-_Ironman_Mark_VII_Helmet_-_Main.stl | 10.6MB | |
| MoeSizzlac_-_Ironman_Mark_VII_Helmet_-_Mask_Hinge_-_Print_4.stl | 217.5KB | |
| MoeSizzlac_-_Ironman_Mark_VII_Helmet_-_Servo_Case.stl | 88.8KB | |
| MoeSizzlac_-_Ironman_Mark_VII_Helmet_-_Top.stl | 818.8KB |
![Arc Reactor Display [Proof That Tony Stark Has A Heart] 3D Printer Model](https://res.3axis.co/99f0ba36-645d-4038-b7cc-227116e27baf/images/a4ef2b67-2bbf-4efb-ac14-322a7c96c800_thumb.jpg)
