Iris Door Box V1 3D Printer Model
The file 'Iris Door Box V1 3D Printer Model' is (stl) file type, size is 3.6MB.
The file 'Iris Door Box V1 3D Printer Model' is (stl) file type, size is 3.6MB.
I'd recommend printing my newest version over this one: http://www.thingiverse.com/thing:140048
I got a ton of requests for this at Maker Faire NYC, so here you go.
I really liked emmetts iris box but was having trouble putting it together and the pins kept breaking. Using his as an inspiration, I built this from scratch to use flat head screws. This version will work very well after some tweaking.
I have included a small and large version. There is also a shorter version of the small base to make it as compact as possible. One disadvantage of this design is that it can't be scaled up or down unless you figure out what size screw will ride in the track properly.
| iris_BIG_base.stl | 2.7MB | |
| iris_BIG_leaves.stl | 10.7MB | |
| iris_BIG_ring.stl | 3.9MB | |
| iris_SMALL_base.stl | 2.1MB | |
| iris_SMALL_base_SHORT.stl | 1.7MB | |
| iris_SMALL_leaves.stl | 10.7MB | |
| iris_SMALL_ring.stl | 3.4MB |
![Slinky [Toy Story] 3D Printer Model](https://res.3axis.co/ffd959c8-2302-41a1-8513-dd7a610a34b2/images/25cc1f87-4dd0-4aad-85c3-6b7012958ed5_thumb.jpg)
