The map's dimensions are approximately 50cm x 55cm.
The map consists of 32 pieces, all ready for printing on a printer bed sized 220x220mm.
Each piece is conveniently numbered on the reverse side, with a layout guide provided in the layout_all.pdf file.
Print the layout.pdf file to match the scale of your 3D print.
Cut along the lines to create a stencil, then affix it to your wall at the desired height.
Piece by piece, align the elements to fit snugly within the layout.
Use double-sided tape or hot glue for secure attachment.
Optionally, utilize the river spacer file for improved alignment.
| 1.stl | 4.3KB | |
| 10.stl | 22.0KB | |
| 11.stl | 7.0KB | |
| 12.stl | 16.9KB | |
| 13.stl | 23.4KB | |
| 14.stl | 6.4KB | |
| 15.stl | 15.9KB | |
| 16.stl | 23.6KB | |
| 17.stl | 8.5KB | |
| 18.stl | 28.9KB | |
| 19.stl | 23.6KB | |
| 2.stl | 13.0KB | |
| 20.stl | 31.3KB | |
| 21.stl | 16.4KB | |
| 22.stl | 25.9KB | |
| 23.stl | 33.0KB | |
| 24.stl | 16.0KB | |
| 25.stl | 25.0KB | |
| 26.stl | 33.0KB | |
| 27.stl | 18.0KB | |
| 28.stl | 38.2KB | |
| 29.stl | 32.9KB | |
| 3.stl | 20.7KB | |
| 30.stl | 38.6KB | |
| 31.stl | 23.8KB | |
| 32.stl | 32.9KB | |
| 4.stl | 3.4KB | |
| 5.stl | 12.7KB | |
| 6.stl | 20.2KB | |
| 7.stl | 5.3KB | |
| 8.stl | 25.7KB | |
| 9.stl | 20.8KB | |
| River_spacer_for_refrence.stl | 11.0KB |
