IPhone X Flexible Case V3 3D Printer Model
The file 'IPhone X Flexible Case V3 3D Printer Model' is (stl) file type, size is 1.9MB.
The file 'IPhone X Flexible Case V3 3D Printer Model' is (stl) file type, size is 1.9MB.
ONLY iPHONE X: for XS, XR etc check below!!
An iPhone X case to be printed with flexible filament. I designed it according to Apple's official design guidelines so it should be 100% correct. I've included 2 cases: one with a thick (2mm) back and one with a thinner (1.2mm) back. The thick one protects the camera well. Some people might find it too thick so I've made the thinner one as well. Because that one doesn't protect the camera very well, I've included a ring that can be printed separately and then glued on. The ring is 0.84mm thick but can be scaled in the z-axis to your liking.
I have also made another iPhone X case with built-in clickable buttons: https://www.thingiverse.com/thing:2719669
The blue case was printed by Rapnit (see "Made" section).
If you print this case, please post a photo or review of it in the "Made" section, feedback is always appreciated.
OTHER IPHONE CASES:
XS : https://www.thingiverse.com/thing:3127463
XS MAX : https://www.thingiverse.com/thing:3125960
XR : https://www.thingiverse.com/thing:3127078
For other cases, check my profile.
| iPhone_X_v3.1_thick_back.stl | 2.2MB | |
| iPhone_X_v3.1_thin_back.stl | 2.3MB | |
| iPX_ring.stl | 270.0KB |
