IPhone Qi Wireless Charging Stand 3D Printer Model
The file 'IPhone Qi Wireless Charging Stand 3D Printer Model' is (f3d,stl) file type, size is 254.5KB.
The file 'IPhone Qi Wireless Charging Stand 3D Printer Model' is (f3d,stl) file type, size is 254.5KB.
Wireless charging stand for your nightstand. The phone will automatically display a special alarm clock style screen when charged on its side. It will switch to dark red colours when the room is dark.
Designed for iPhone X and higher, but not the "Max" models.
Required components:
Solder the red wire to the center pin of the power socket, and the black wire to the outer ring. Measure first with the power supply connected if unsure.
Push the charging coil all the way to the end of the top and bottom rail. It will stop exactly in the middle because the part of the model behind the camera bump is solid.
The model is designed in Autodesk Fusion 360. The file is included. The clearance between the case and the cover is a parameter.
I would love to see photos of your makes.
| iPhone_Stand_v4.f3d | 244.8KB | |
| iPhone_Stand_v4_Case.stl | 6.3KB | |
| iPhone_Stand_v4_Cover_tol_0.05mm.stl | 21.2KB | |
| iPhone_Stand_v4_Cover_tol_0.10mm.stl | 21.2KB | |
| iPhone_Stand_v4_Cover_tol_0.20mm.stl | 21.2KB |
