Holder for the phone is made on the basis of the Garmin navigator mount.
The holder has free movement of the side mounts by 5 mm each. The bottom mount does not move.
The bottom mount has a notch for the charger.
The mounts are attached to the base with an I-beam.
The base is carefully sized and easily secured to the navigator mount with one hand.
The holder is designed for phones no thicker than 8.2 mm (iPhone 6/6s with silicone cover). If your phone is of a other thickness, you can change the width in the model file in Sketch18 and Sketch19 from 8.5 mm to the desired one. Don't forget to add 0.3 mm.
You need:
base - 1 unit
i-beam - 1 unit
fix-down - 1 unit
fix-left-right - 2 units
| base.stl | 93.0KB | |
| fix-down.stl | 16.1KB | |
| fix-left-right.stl | 3.4KB | |
| for_fushion_360.f3d | 485.8KB | |
| i-beam.stl | 2.2KB |
