Used Punisher logo by u/john_rowe as the inlay. Thanks.
Print the inlay first and then print the case. Make sure both are centered in the bed.
I printed the case without support. However, if you need to add support for the plug and speaker cutouts make sure to slice it without support for the inlay portion. There is a cutout for the inlay on the case and since it is raised, creating supports will force the print head to print supports onto the inlay which may damage the inlay.
Also very important to make sure z-hop height at least 0.4mm as that is the height of the inlay.
I used TPU for both part as that seems to adhere better. Tried doing the inlay in PLA cause I just have more colors in PLA and case in TPU and would also separate when I tried to remove it from the bed; but not sure if its just the brands I'm using.
| iPhone_15_Pro_Max_Punisher_Case.stl | 890.0KB | |
| iPhone_15_Pro_Max_Punisher_Case_-_Inlay.stl | 312.1KB |
