Gaming handles for iPhone 15 Plus.
It is designed to sit on a basic phone case.
Everything has a Flat surface so it's easy to print and requires support.
You will need M4/5 10mm long wood screws to connect the rounded back to the handles and a 2/2.5 mm wide rubber band to connect the two halves, altho will work without it.
| Component1_Iphone_Hendales_v6_Body1.stl | 484.1KB | |
| Component1_Iphone_Hendales_v6_Body16.stl | 445.3KB | |
| Component1_Iphone_Hendales_v6_Body17.stl | 444.3KB | |
| Component1_Iphone_Hendales_v6_Body4.stl | 593.0KB | |
| Iphone_Hendales_v7.f3d | 1.1MB |
