IPhone 12 Floating Magsafe Stand 3D Printer Model
The file 'IPhone 12 Floating Magsafe Stand 3D Printer Model' is (stl,f3d,step) file type, size is 4.8MB.
The file 'IPhone 12 Floating Magsafe Stand 3D Printer Model' is (stl,f3d,step) file type, size is 4.8MB.
A stand for the new lineup of iPhones (iPhone 12, 12 Pro, 12 Mini, 12 Pro Max) that magnetically holds the phone using a Magsafe charger. The stand is completely obscured by the phone, and curves away from the bottom, making it look as if the phone is floating. The Magsafe puck can just be lightly press fit into the stand, but if you want extra security a small piece of double sided tape between the puck and the stand should do the trick. Then thread the USB-C cable through the hole in the back, and press the cable into the indented slot.
The stand was loosely inspired by Verner Panton's iconic Panton chairs, as the stand has a similar cross-section and profile.
The STL file is the one you should use if you want to print the design, the other two can be used to edit the stand in you CAD program of choice.
| iPhone_Stand.stl | 2.5MB | |
| Magsafe_Stand_v41.f3d | 3.1MB | |
| Magsafe_Stand_v41.step | 1.7MB |
