IPcam Under Eave “L” Mount For Tonton Mini Dome 3D Printer Model
The file 'IPcam Under Eave “L” Mount For Tonton Mini Dome 3D Printer Model' is (gcode,stl,FCStd) file type, size is 531.3KB.
The file 'IPcam Under Eave “L” Mount For Tonton Mini Dome 3D Printer Model' is (gcode,stl,FCStd) file type, size is 531.3KB.
I designed this "L" bracket to mount a Tonton Mini Dome IP Camera under the eave of my house. The mounting holes on the short leg of the bracket align with the mounting on the Tonton mini dome (1ph38602w model PE3021-w) IP Cam. The mounting holes on the longer leg of the bracket do not align with the IP camera mount and are simply placed in the four corners. The bracket is approximately 1/4 inch thick (6.35mm) and was printed at 50% infill.
The inside measurements of the bracket are108.3mm x 90.3mm and a thickness of 6.35mm.
The screw holes have a radius of 2.9mm (.22 in diameter).
| CE3E3V2_SecCamBracket.gcode | 1.9MB | |
| SecCamBracket.stl | 43.2KB | |
| Tonton_1ph38602w-PE3021-w_MiniDome_bracket.FCStd | 33.6KB |
