IPad / Pro / Air / Air2 Stand 3D Printer Model
The file 'IPad / Pro / Air / Air2 Stand 3D Printer Model' is (stl) file type, size is 36.1KB.
The file 'IPad / Pro / Air / Air2 Stand 3D Printer Model' is (stl) file type, size is 36.1KB.
I needed a stand for an iPad Air 2, to have it stand upright. Works of course in landscape as well. There are two versions to fit multiple iPad models, slot width 6.3mm and 7.7mm.
The .stl files differentiate in the following:
Stand_63 with 6.3mm, works with iPads that are 0.24" thick, like:
Stand_77 with 7.7mm, works with iPads that are 0.29" thick, like:
It will fit to many more, but best is to just measure the thickness of yours, should be slightly thinner than 6.3mm or 7.7mm. Then it will work.
I sticked some thin rubber to the rear feet, to prevent it from sliding, works very well.
| Stand_63.stl | 60.3KB | |
| Stand_77.stl | 59.3KB |
