I designed this wall mount to charge an iPad Air 4.
Its comprised of 3 parts:
1) Frame to house the iPad that is screwed to the wall
2) Cable Base plate, to secure the USB Cable to (i used a cable tie, a shim (also provided) and filled any gaps with a 3d pen - This allowed the cable to remain firmly in place)
3) Cable Cover, to hide the base plate and cable connector.
Shim, optional. I designed it to keep the usb cable centered (its need depends on the cable you use)
Please note that the dimensions of the wall mount assume an iPad Air 4 with a cover.
A cover like this one from amazon was used. (https://www.amazon.com/MoKo-Generation-Lightweight-Translucent-Protector/dp/B08DJ539ZQ/ref=sr_1_18?dchild=1&keywords=ipad+air+4+2020+cover&qid=1604335869&sr=8-18)
If you are using the ipad without a cover this wall charging mount will be too big and you will need to reduce the dimensions slightly.
You will need:
2x M2.5 Screws2x M2.5 Nuts3d pen (optional) - to fill in any gaps around usb terminal/cradle| iPad4_Cable_Cover.stl | 321.7KB | |
| iPad4_with_Case_Frame.stl | 313.9KB | |
| iPad_Cable_Base_Plate.stl | 358.9KB | |
| Shim.stl | 2.2KB |
