IPA Recyling Funnel With Screw On Thread For Typical Bottles 3D Printer Model
The file 'IPA Recyling Funnel With Screw On Thread For Typical Bottles 3D Printer Model' is (stl) file type, size is 203.0KB.
The file 'IPA Recyling Funnel With Screw On Thread For Typical Bottles 3D Printer Model' is (stl) file type, size is 203.0KB.
Just a quick and dirty funnel design to recycle used IPA within normal bottles. I use an old water bottle but the thread will most likely fit any bottle with a similar size neck. The idea is that once you have done a rough filtering of your used IPA and have let it cure for some time in the sun you can then filter it through again into a new bottle using this funnel and with the help of a regular coffee filter.
The funnel consists of two parts. The main funnel with a thread that you can screw on a water bottle and a spacer for inside the funnel so as to not limit the throughput of the coffee filter only to the opening which will clog up after a while.
Also included a version of the funnel which has no screw on part.
Print it upside down on the plate and you will need no supports.
| Funnel_filter_spacer.stl | 111.4KB | |
| Main_Funnel_no_threads_.stl | 230.4KB | |
| Main_Funnel_with_threads_for_bottle.stl | 347.3KB |
