IoT Relay And Raspberry Pi 4b Mount 3D Printer Model
The file 'IoT Relay And Raspberry Pi 4b Mount 3D Printer Model' is (stl) file type, size is 787.3KB.
The file 'IoT Relay And Raspberry Pi 4b Mount 3D Printer Model' is (stl) file type, size is 787.3KB.
If you want to incorporate auto-shutoff to your 3D printer, you have a few options between wiring your own relay switch or utilizing the popular IoT Relay. When connected to your Raspberry Pi 4b, the wiring can cause a potential problem of being ripped from either end. With this model, your IoT Relay and your Raspberry Pi come together in a single unit that will stay within reach of each other. Included is a wall mountable version (pictured) or a table top. Also included are “custom” hex Raspberry Pi top with a port hole for the wiring.
The IoT Relay can be easily zip-tied onto the mount for secure fastening. Don't be too aggressive tightening them, however, as they'll snap off - but it's good enough to not cause the relay to fall out.
The Raspberry Pi top comes in two variants, with and without a hole for a momentary switch to support turning your Pi on/off safely.
| Case_Top_No_Switch.stl | 968.5KB | |
| Case_Top_With_Switch.stl | 979.7KB | |
| IoT_Relay_Mountable.stl | 626.4KB | |
| IoT_Relay_TableTop.stl | 541.0KB |
