Intubation Tool For Small Animals 3D Printer Model
The file 'Intubation Tool For Small Animals 3D Printer Model' is (stl) file type, size is 161.3KB.
The file 'Intubation Tool For Small Animals 3D Printer Model' is (stl) file type, size is 161.3KB.
A guiding tool made and test printed for a vet friend. It is a simple tool that can save animal lives and I think it should definitely be shared. Made according to example/sketch.
Free to scale up or down to at least 60% (I didn't scale beyond that). The base is suitable for narrow tubes of ± 8-10mm (intubator width is 11mm). Smaller tubes can be used by scaling down.
Use a raft for printing. I used a raft of 3 layers, a z-distance for the raft of 0.1 and a width all around of 5mm.
Use support up to 40° (I used tree support) for only the tip.
Printed with nozzle 0.4, layer thickness 0.2 and 3 outer walls to ensure that there would be no filling.
After printing, rework the entire tool by means of scrape with a sharp hobby knife and smoothing with fine sandpaper.
| intubation_tool.stl | 434.0KB |
