I see an idea of skimmer hack, so draw my own and share for you
Real use:
https://youtu.be/pssqX_OXwX0
Holder on frame need to buy and use M8 screw.
Net leaf skimmer is INTEX 29051
LONG part
If you have ender 3 or ... print size max 220, the long part print flat and diagonal
On one side is smal arrow, print it face up and use arrow on skimmer side.
Use brim on pins.
NO SUPPORTS NEEDED
PRINTED PTEG (do not use pla with water)
used infill 100%
| Drziak_final.stl | 2.1MB | |
| Pin_maly_final.stl | 1.0MB | |
| Pin_velky_final.stl | 1.0MB | |
| Rameno_final.stl | 14.3MB | |
| Rucka_final.stl | 2.1MB |
