Smaller Intex pools (mine is a metal frame 366x77cm 6,5m3) comes with no angled nozzle and just spray the return water straight for the midle. It's better to get the water to rotate, it will make your skimmer get alot more stuff, prevent algy and probably better in many other ways to!
lowres and highres stl available. thats the only differens of the two files, the resolution.
How to fit it:
unscrew the nozzle from the inside of the pool, press the printed angled nozzle from the backside and in untill enough of it is out to spray the water with an angle!
For what I have heard the best way to circulate the water in a circular pool is to point the nozzle to the side and tilted down abit so you move the water on the bottom of the pool and get all the water to move. Then no alge =)
If it's to tight / to loose, try to scale it 1-2% before print, mine fitted perfectly with standard size.
I'l hope you find good use for this one =)
| angled_waterjetnozzle_v3_highres.STL | 49.8MB | |
| angled_waterjetnozzle_v3_lowres.STL | 431.8KB |
