Just a simple male to male connector for 32mm (1.25") to 32mm (1.25") hose. I made this to extend my backwash/drain hose for my Intex 2100gph sand filter pump with hoses I already had. I also printed the 38mm (1.50") to 32mm (1.25") adapter (found on thingiverse) to connect this hose to the sand filter pump. I used the clamp that came with the hose but any clamp should work.
Here is the pump filter adapter I used: https://www.thingiverse.com/thing:954874
If you print one please post a pic of it. Thanks!
32mm Intex Hose: https://www.amazon.com/gp/product/B003IMBWEU/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=timbolton-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B003IMBWEU&linkId=e4fa8b411947d7ea8d1f4c0d9517e678 (2 pack: https://www.amazon.com/gp/product/B003IMBWEU/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=timbolton-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B003IMBWEU&linkId=e4fa8b411947d7ea8d1f4c0d9517e678)
| Intex_Hose_32mm_to_32mm_Connector.stl | 1.3MB |
