UPDATE: There is currently as mesh problem for the "Gun, Left, Top" Which means it will not print properly. the muzzle itself will print without much of the details, and be completely flat. Looks weird.
This can be easily fixed by taking the "Gun, Right, Top" And flipping it, until i fix the mesh problem.
Also, for some reason, the measurements I've made for the Chimera connector part is Waaay off. the diameter of the center is good, but the height and length of the wings are, atrocious.
Platform for the turret can be found here:
https://www.thingiverse.com/thing:2421568
Whereas the Quad Mortar lay down devastating amounts of firepower upon the enemy infantry, the Quad Cannon shreds anything flying high above the clouds.
This model is meant for use with other vehicles, platforms and what not.
Note: The guns and the Sensor Array can be positioned differently, as they are in an open socket.
It is the first time I've tried using an open socket, so I hope it works well.
| Body_Bottom.stl | 110.6KB | |
| Body_Chimera_Connector.stl | 23.5KB | |
| Body_Extra_Gear.stl | 110.4KB | |
| Body_Light_and_Sensor_array.stl | 811.0KB | |
| Body_Top.stl | 721.0KB | |
| Gun_Hydra_AddOn.stl | 498.6KB | |
| Gun_Left_Bottom.stl | 397.9KB | |
| Gun_Left_Top.stl | 605.3KB | |
| Gun_Right._Bottom.stl | 397.9KB | |
| Gun_Right_Top.stl | 608.6KB | |
| Wyvern_Single_Model.stl | 4.4MB |
![Tank T-34-76 [RE-POSTED] 3D Printer Model](https://res.3axis.co/9e350190-eb57-4d72-a136-c23d81081e2d/images/551449ea-a19f-488a-b547-6dd33d1983a9_thumb.jpg)
