The file 'Interlocking Dovetail-sided Box For Small 1/2 Oz. Eyedroppers And 15mL E-juice Bottles 3D Printer Model' is (SLDPRT,stl,ini) file type, size is 1.8MB.
This is a little interlocking design I made to organize a collection of small homemade Sriracha eyedroppers. I was inspired by another design I saw recently on this site and decided to make my own to suit my purposes.
I designed this as a "cheap" design I could use to calibrate my machine as well as be something I could print over and over, and not mind having too many extras.
The interior hole is designed to be a bit wider than 1" in diameter, and 7/8" deep. The overall size is about 1"h X 1.41"w X 1.41"d. The dovetails I had to play with their size a bit to get them to go together easy enough. Using the settings I have on the instructions page, I was able to print these so they were flexible enough to snap apart without damaging the dovetails. I haven't experimented further, once i found some settings that worked well, I ran with it.
Let me know what you think or if there's any other details you'd like.
Thanks Cracky for the inspiration.
Enjoy!
| DovetailSidedBox.SLDPRT | 657.5KB | |
| Dovetail_Box_-_1up.stl | 1.6MB | |
| Dovetail_Box_Set-O-4.stl | 6.5MB | |
| IansDefaultMatterControlSettings.ini | 3.9KB |
