Integrated BMG E3d V6 Linear Mount 3D Printer Model
The file 'Integrated BMG E3d V6 Linear Mount 3D Printer Model' is (step,stl) file type, size is 4.6 MB.
The file 'Integrated BMG E3d V6 Linear Mount 3D Printer Model' is (step,stl) file type, size is 4.6 MB.
This is a minimal integrated printhead for my linear Ender 3, but will fit others to. I needed something small and sturdy but could not find what I was looking for so I decided to make it myself.
The design has not been tested enough yet but it feels like it will pass the test of time.
It has an integrated BMG extruder and a E3D v6 mount. It uses a 40x40 fan for the heatsink and a 5015 as a blower with a Prusa fan shrout which I'v had great experience with.
I took all gears and stuff for the BGM from a Trianglelabs clone that a used with "The Tank" by Greg191134 from where much inspiration came.
This is thought to be a modular design but this first version is targeted at my Ender 3. The belt mount is made for that printer but as it's a separate piece it can be modified to fit most printers. It's made for a MGM12 rail but will fit others that is maximum 27 mm wide and has a 20x20mm hole space. This version is for a vertical rail but I will make one for horizontal to.
I will put up more information as soon as possible with all the right lengths for screws and stuff, there all m3 though.
BL Touch offset is 25 left and 5 front of nozzle.
UPDATES
2020-01-18: Updated some STL's with a little larger tolerances for less post processing.
2020-02-11: Updated the belt mount to be able to use the stock belt from the Ender 3, the first one was to tight.
2020-04-17 Uploaded the STEP-file
| BMG_E3D_v6_Linear_mount_v38.step |
| SB_direct_drive_mgn12_bmg_back.stl |
| SB_direct_drive_mgn12_bmg_bltouch_mount.stl |
| SB_direct_drive_mgn12_bmg_cover.stl |
| SB_direct_drive_mgn12_bmg_ender3.stl |
| SB_direct_drive_mgn12_bmg_front.stl |
| SB_direct_drive_mgn12_bmg_lever.stl |
| SB_direct_drive_mgn12_bmg_prusa_fan_mount.stl |
| SB_direct_drive_mgn12_bmg_prusa_fan_shrout.stl |
