Instax Adapter For Vintage Kodak Instant Cameras 3D Printer Model
The file 'Instax Adapter For Vintage Kodak Instant Cameras 3D Printer Model' is (stl) file type, size is 197.0KB.
The file 'Instax Adapter For Vintage Kodak Instant Cameras 3D Printer Model' is (stl) file type, size is 197.0KB.
This is an adapter for using Instax Square film directly in old Kodak Handle-type cameras. It consists of two parts, the main section, and a spring adapter plate.
I used PLA+, but any material should work, just make sure to use black so that there's not light bouncing around inside the camera.
For the main spring in the adapter, I used a .6 x 7 x 20mm 10 lap spring that was then stretched to be about 35 or 40mm. For the spring back plate adapter, I used a .6 x 7 x 10mm 6 lap spring that I cut in half and used both halves in the adapter.
See the video here: https://youtu.be/Kah2gFWZKgk
NOTE: I've also included the picker arm adapter for Kodak EK-4 model cameras, but it is still a work-in-progress and may jam or have other reliability issues, or worse, may cause damage to your camera.
NOTE 2: I've added the roller adjustment bracket for EK-4 cameras. You must disassemble the roller section to install these. They should be printed solid.
| Kodak_Instant_ek4_roller_bracket.stl | 4.2KB | |
| Kodak_InstaxSquare_bottom.stl | 101.8KB | |
| Kodak_InstaxSquare_main.stl | 95.8KB | |
| Kodak_InstaxSquare_picker.stl | 97.1KB | |
| Kodak_InstaxSquare_picker_ek4_WIP.stl | 67.4KB | |
| Kodak_InstaxSquare_plug.stl | 68.8KB | |
| Kodak_InstaxSquare_Spring_base.stl | 97.9KB | |
| Kodak_InstaxSquare_Spring_top.stl | 93.5KB |
![Timon [Lion King] 3D Printer Model](https://res.3axis.co/d5198e72-7677-4efb-b76b-4147651e7fcd/images/b60df999-b01c-4211-8da1-3c6facfdd42e_thumb.jpg)
