Create your own gallery of your instant photos!

Fully adjustable to desired photo size and height.

Just tilt the Bottom Support and slide them to the desired height. Rotate back and she locks in place. Slide the Top Support over the top of the photo.

Suitable for all available Instant Photo formats.

To mount the Pole, slide it into the recess of the Base. The tapered shape locks it in place.

Size is designed and optimized for use with instand photo's but you can however use it also for normal photo's up to 6''x4''.

Update:

The tapered chamfer on the Pole became a bit rough when printed. This has been replaced by a double chamfer (with half slope) on both sides of the pole. The Base has also been adjusted accordingly. The marking on the bottom of the Base also disappeared. Clamping after installation is now even tighter.

You can also double print the desired Bottom or Top Support and show a self-printed label below or above your photo! For mounting above the photo: turn the Top Support over and let it rest on the other. For this I also added a 60x25mm blank plate so you can add your own text in the slicer. (See photo)

Finally, I added 2 versions alternative Base. The original was 60x60 (I still think this is the nicest), the additions are a Base of 60x30mm and a Base of Ø50mm.

p.s. The photos are self-taken photos during a light spectacle around a number of ponds in the fall of 2023.