I wanted to mount the Insta360 GPS Remote to my brake fluid reservoir, because on my 2011 CBR 1000 RR is not a lot of spare space.
The diameter of my brake fluid reservoir is 50mm (just shy of 2 inches)
Design was done in SpaceClaim 2020R2
Thanks a lot to belong100 for providing the CAD files.
Changelog V2:
Additional information:
I designed this with my DLP printer in mind, so be aware if you're useing a FDM printer you might need to alter the design. especially the buttons covers might be a problem, or you can use version 1.
Also, it seems like the BT signal of the Insta360 Remote is very weak, if i position my X2 on the rear left on the selfie stick, and have my remote front right, with me blocking direct sight between the two, they loose signal every time..
if i mount the camera on the same side (right) it works fine.
| Insta360_Remote_Holder_Brake_Fluid_Reservoir.scdoc | 2.3MB | |
| Insta360_Remote_Holder_Brake_Fluid_Reservoir.stl | 243.1KB | |
| Insta360_Remote_Holder_Brake_Fluid_Reservoir.stp | 2.2MB | |
| Insta360_Remote_Holder_Brake_Fluid_Reservoir_V2.scdoc | 2.8MB | |
| Insta360_Remote_Holder_Brake_Fluid_Reservoir_V2.stl | 380.9KB | |
| Insta360_Remote_Holder_Brake_Fluid_Reservoir_V2.stp | 2.3MB |
