Insta360 Go3 Magnetic Mount Vertical And Horizontal Versions 3D Printer Model
The file 'Insta360 Go3 Magnetic Mount Vertical And Horizontal Versions 3D Printer Model' is (STL) file type, size is 393.5KB.
The file 'Insta360 Go3 Magnetic Mount Vertical And Horizontal Versions 3D Printer Model' is (STL) file type, size is 393.5KB.
Printed Using 0.4mm nozzle at 0.3mm layer height,
Use two 10mmx3mm N35 Neo Disc magnets. Mind magnet orientation, as their poles reverse in placement, confirm correct direction by placing on your Go3 first, supper glue them in place.
I've added holes to the sides to fit a small zip-tie for security, the magnets are sufficient but just in case you are doing something ultra rough it won't hurt to add one.
The print settings I used results in a snug fit, no trimming or sanding required but I have added holes to the bottom in case you need to force it out, the one hole is a lens emblem to help remind you which side the lens sits.
Enjoy and post makes.
| Go3_mount_horizontal.STL | 630.1KB | |
| Go3_mount_vertical.STL | 604.6KB |
