Inshore Saltwater Fishing Lure 3D Printer Model
The file 'Inshore Saltwater Fishing Lure 3D Printer Model' is (gcode,stl) file type, size is 1.0MB.
The file 'Inshore Saltwater Fishing Lure 3D Printer Model' is (gcode,stl) file type, size is 1.0MB.
Designed to be weighted by a standard BB used in BB guns. Also designed to be used with Stainless Steel #216-1/2 in Screw Eyes that can be purchased from any home store (Home Depot). Designed for use with 4mm fish eyes. Use your favorite two part epoxy to put together and to clear once painted. This model also has a square compartment for a rattle, I also use BB's for this as well!
I had a hard time slicing this one, so make sure that the two halves are flat before exporting the gcode. You may have to cut off a a tiny bit of the bottom layer to get it flat. Because of this, I am also uploading the gcode that I personally use to print. I've caught quite a few sea trout with this model myself. Let me know if you have any questions and be sure to check out my other lure designs.
| Salt_Lure_Short.gcode | 2.9MB | |
| Salt_Lure_Short.stl | 890.3KB |
