Innovv K5 Rear Cam (1080p) Mount For Evotech Tail Tidy Street Triple 3D Printer Model
The file 'Innovv K5 Rear Cam (1080p) Mount For Evotech Tail Tidy Street Triple 3D Printer Model' is (stl) file type, size is 121.1KB.
The file 'Innovv K5 Rear Cam (1080p) Mount For Evotech Tail Tidy Street Triple 3D Printer Model' is (stl) file type, size is 121.1KB.
I've designed this mounting bracket for my Innovv K5 rear camera to attach to the tail tidy by Evotech on the right wing as see in the photos and video.
There is a top part and a bottom part.
The top part has a angled cut at the top-back so it can sit flash with the belly of the bike when you push the mounting bracket all the way towards the center of the tail tidy wing. This way, there is no need for an additional zip tie/cable tie since the top won't come off.
The bottom part has the mounting mechanism with optional place to insert an bolt and nut as per video for additional strength.
I had installed it for over 2 years and it hasn't had any issues, still going strong.
Good luck. I'll probably reply sooner if you ask any questions under my YouTube video in the comments before I check this post.
| Innovv_K5_rear_Bottom.stl | 85.8KB | |
| Innovv_K5_rear_Bottom_plus__Mount.stl | 200.8KB | |
| Innovv_K5_rear_Top.stl | 107.7KB |
