Since the InMoov DiskInternV3.stl logo plate that mounts inside the four DiskExternV2.stl did not print well or have good contrast I decided to print the InMoov logo on Transparency Film, and mount that over a smooth plate, with an outer mounting ring to hold it all in place. I used flat black paint on the DiskExternV2.stl assembly and the mounting ring. The gold rings are 23 karat gold leaf and make this look like a Mayan artifact! I'm driving the Arduino Nano with this InMoovLogo.txt script. (rename it to .ino) Install the Arduino Library Neo Pixel support. I'm on a Mac so I did first install the FTDI driver, which got the usbserial showing up in the system report. Then I had to install the Mac serial driver here http://0xcf.com/2015/03/13/chinese-arduinos-with-ch340-ch341-serial-usb-chip-on-os-x-yosemite/ (I apparently have $3 Nano knock offs from China) - and they're working just fine.
| DiskInternV3_No_Logo.stl | 91.7KB | |
| InMoovLogo.txt | 4.0KB |
