Gael has released a sculpted battery door cover! Those parts are the last four links here: http://inmoov.fr/back/ You may not need this one I used temporarily.
This InMoov door is basically a 1.5mm x 114mm x 190mm slab that you then hot form into the battery door shape. I used a torch on very low as a heater, and 1 inch pipe for a form, as well as the battery opening itself. The print is larger than the 12cm build space Gael designs by, and we too are awaiting his final design.
| Battery_Cover_Clips.stl | 26.1KB | |
| Battery_Cover_fixed.stl | 14.1KB |
