Inline 4 Engine 3D Printer Model
The file 'Inline 4 Engine 3D Printer Model' is (stl) file type, size is 17.8MB.
The file 'Inline 4 Engine 3D Printer Model' is (stl) file type, size is 17.8MB.
This is a inline 4 engine.
-Piston stroke: 40mm
-Piston diameter: 28mm
-Cubic capacity: 98,52ccm
-The assembled bearings: 608 8x22x7
-The two connecting rod parts are centred with a pice of filament and then glued together.
-The crankcase and cylinder-casing-top are glued together.
| connecting-pin.stl | 682.5KB | |
| connecting-rod-1.stl | 5.4MB | |
| connecting-rod-2.stl | 1.2MB | |
| crankcase.stl | 19.8MB | |
| crankshaft.stl | 15.6MB | |
| cylinder-casing_top.stl | 49.0MB | |
| handle-1.stl | 5.3MB | |
| handle-2.stl | 2.2MB | |
| locking-ring-handle.stl | 401.8KB | |
| piston-ring.stl | 1.0MB | |
| piston.stl | 9.5MB |
