Infinity Mirror For Thermaltake Tower 900 Computer Case 3D Printer Model
The file 'Infinity Mirror For Thermaltake Tower 900 Computer Case 3D Printer Model' is (stl) file type, size is 16.1KB.
The file 'Infinity Mirror For Thermaltake Tower 900 Computer Case 3D Printer Model' is (stl) file type, size is 16.1KB.
This is the 3D print to make an infinity mirror for the front of the Thermaltake Tower 900 computer case.
The back slot needs a mirror. The front slot needs a piece of glass with a one way film. I cut the mirror and glass by hand to make them the correct size. Between the two you need to put a strip of LEDs. I used two strips so that I could make the left and right side different colors. I also wrapped it in vinyl so that it looked nice and so that you can't see the 3D print lines. Below is a list of the materials I used.
I also have the reservoir/pump stands and the LCD box on Thingiverse.
Here is a link to the completed computer build if you are interested:
It is on PCPARTPICKER, 7hXPxr
https://pcpartpicker.com/b/7hXPxr
Materials:
Coavas Solar One Way Mirror Film Non Adhesive Static Cling Heat Control Sun Blocking Glare Reduction Anti UV Window Tint Removable for Home and Office 17.7" x 78.7" Silver
CHINLY 16.4ft WS2812B Individually Addressable LED Strip Light 5050 RGB SMD 150 Pixels Dream Color Waterproof IP67 Black PCB 5V DC (Black PCB 16.4ft 150leds waterproof)
| LeftEnd.stl | 14.1KB | |
| LeftMiddle.stl | 24.4KB | |
| RightEnd.stl | 14.1KB | |
| RightMiddle.stl | 24.4KB |
