Industrial Shed 3 (z-scale) 3D Printer Model
The file 'Industrial Shed 3 (z-scale) 3D Printer Model' is (stl) file type, size is 73.83 KB.
The file 'Industrial Shed 3 (z-scale) 3D Printer Model' is (stl) file type, size is 73.83 KB.
Industrial shed 3 (z-scale)
This design contains several versions of wall elements, differing in the number and position of the gates, allowing to build several variations of this shed.
Additionally different versions of the baseplate are included, differing in in the position of the ramps to fit to the chosen wall elements.
Assembling:
Paint to your taste and assemble as seen in the picture.
Printing:
Print the wall elements flat on the printing bed to allow the details printed without/few supports, base plate and roof with the lower side in the printing bed.
Mirror the elements in your printer software in case you need it in another orientation.
For n-scale use a scaling factor of 1,38 in your printer software.
| t064a1_base_plate_version_a_-_1_ramp_front.stl |
| t064a2_base_plate_version_a_-_2_rampa_front.stl |
| t064a3_base_plate_version_a_-_1_ramp_side.stl |
| t064a4_base_plate_version_a_-_2_ramps_side.stl |
| t064a5_base_plate_version_b_-_1_ramp_front_1_ramp_side.stl |
| t064a6_base_plate_version_b_-_2_ramps_front_2_ramps_side.stl |
| t064b1_front_wall.stl |
| t064b2_front_wall_with_door.stl |
| t064c1_side_wall.stl |
| t064c2_side_wall_1_door_center.stl |
| t064c3_side_wall_1_door_off-center.stl |
| t064c4_side_wall_2_doors.stl |
| t064d_roof.stl |
