Industrial Reactor Part 3 3D Printer Model
The file 'Industrial Reactor Part 3 3D Printer Model' is (stl) file type, size is 9.0MB.
The file 'Industrial Reactor Part 3 3D Printer Model' is (stl) file type, size is 9.0MB.
Part 3 of my inofficial addons to the sector mechanicus. Orange Parts in Picture in this pack.
V1 and V2 height of is 71mm and paired with reactor 2(51mm)(other thing linked down below) it is 122mm the same height as the official walkways.
V3 is a slightly cut down version of V1 and is only 61mm high.(same as the official with the comparable size) This twice gives you again 122mm (walkway height)
Connection point at top and bottom is 40mm.
Adapter for Mechanicus Sector Pipeline Connection:
http://www.thingiverse.com/thing:3753403
Update 2019-04-27
Uploaded a alternative cut version of the files.
The files are have the prefix "AC"
Top and bottom are the same for all 3 versions just the "body" is different.
Update 2019-04-26
Reuploaded all files because the walls in a few positions was too thin and the slicer didn't print them.
I also made the Icon on V2 to be printed seperatly.
Here are the other parts shown in the picture:
https://www.thingiverse.com/thing:3736132
https://www.thingiverse.com/thing:3530600 -> Funnel_4
https://www.thingiverse.com/thing:3571386 -> Reactor
https://www.thingiverse.com/thing:3576491 -> Reactor 2
| AC_R3_Body.stl | 1.2MB | |
| AC_R3_Bottom.stl | 491.8KB | |
| AC_R3_top.stl | 1.3MB | |
| AC_R3_V2_Body.stl | 2.4MB | |
| AC_R3_V3_Body.stl | 1.3MB | |
| Reactor_3.stl | 1.9MB | |
| Reactor_3_bottom.stl | 1.4MB | |
| reactor_3_simple.stl | 364.5KB | |
| Reactor_3_top.stl | 1.3MB | |
| Reactor_3_V2.stl | 5.5MB | |
| Reactor_3_V2_bottom.stl | 3.4MB | |
| Reactor_3_V2_Icon.stl | 147.5KB | |
| reactor_3_v2_simple.stl | 468.5KB | |
| Reactor_3_V3.stl | 2.3MB | |
| Reactor_3_V3_bottom.stl | 1.6MB |
