Industrial Pipe Components For Warhammer40k 3D Printer Model
The file 'Industrial Pipe Components For Warhammer40k 3D Printer Model' is (STL) file type, size is 4.4MB.
The file 'Industrial Pipe Components For Warhammer40k 3D Printer Model' is (STL) file type, size is 4.4MB.
Component list:
-90° elbow LEFT hand turn
-90° elbow RIGHT hand turn
-90° elbow DOWN/UP turn
-Little top T-section cap
I have made 3 different elbows, and a top cap component that can be added to a length of plastic piping.
The specific pipe I used is shown in the link below, but you can try other pipes as well as long as the outer diameter is 42.27mm or 1-11/16th".
I have included a link below that shows the type of pipe you should use for the straight section:
http://tinyurl.com/htmvo4s
I used a "Form2" printer, @ 0.025mm print resolution to make the parts shown in the image above, so you may need to do a bit of sanding and finishing if you plan on printing with any printer that works at a lower resolution.
| left.STL | 4.1MB | |
| right.STL | 4.1MB | |
| top_cap.STL | 1.4MB | |
| up_down.STL | 3.6MB |
