Indoor Dog Wee Station 3D Printer Model
The file 'Indoor Dog Wee Station 3D Printer Model' is (STL) file type, size is 1.5MB.
The file 'Indoor Dog Wee Station 3D Printer Model' is (STL) file type, size is 1.5MB.
I designed a dog wee station using a fire hydrant assembly to a piece of astroturf to create a fixed point inside my house for my small dogs to use. This can be printed using no supports and with a density below 5%. If you are using astroturf you simply have to mark the mounting holes on the underside of the mat and cut using a stanley knife or a small hole drill. Take caution if you are going to use this outdoors to use UV resistant plastic filament. The final product is lightweight allowing for the complete unit and astroturf to be rinsed in a bath or shower.
| Fire_Hydrant_body_1.STL | 606.7KB | |
| Fire_Hydrant_body_2.STL | 971.6KB | |
| Fire_Hydrant_Cap_1.STL | 365.9KB | |
| M14x40_Base_screw.STL | 586.0KB | |
| M14x50_Hex_screw.STL | 726.4KB | |
| M14_Hex_Nut.STL | 271.3KB | |
| M14_Hex_Nut_Thin.STL | 178.3KB |
