Incubator With Circulating Air / Brutschrank Umluft 3D Printer Model
The file 'Incubator With Circulating Air / Brutschrank Umluft 3D Printer Model' is (123dx,stl) file type, size is 2.3MB.
The file 'Incubator With Circulating Air / Brutschrank Umluft 3D Printer Model' is (123dx,stl) file type, size is 2.3MB.
Hello world!
I proudly release my circulating air incubator. The "base" version comes with two slots and a room of 124x124x84mm and can be extended up to four slots and 124x124x168mm (length x width x height).
Each slot can hold two petri dishes, or you just insert the lower tray and can put some test-tubes on it.
The temperature can be set in 1°C steps.
You need the following additional parts to build the incubator:
Of course you do not need to buy it from Amazon, but I think it is the easiest way to show you which parts are working.
| 10_case_top_pla.123dx | 73.8KB | |
| 10_case_top_pla.stl | 690.7KB | |
| 11_lid_abs.123dx | 101.7KB | |
| 11_lid_abs.stl | 1.7MB | |
| 12_fan_lid_abs.123dx | 44.9KB | |
| 12_fan_lid_abs.stl | 119.1KB | |
| 13_fan_holder_abs.123dx | 46.5KB | |
| 13_fan_holder_abs.stl | 141.9KB | |
| 14_top_lid_pla.123dx | 52.7KB | |
| 14_top_lid_pla.stl | 364.0KB | |
| 15_door_hinge_pla.123dx | 62.9KB | |
| 15_door_hinge_pla.stl | 286.1KB | |
| 16_door_knob_abs.123dx | 79.3KB | |
| 16_door_knob_abs.stl | 7.6KB | |
| 17_door_for_2_trays_abs.123dx | 58.7KB | |
| 17_door_for_2_trays_abs.stl | 467.8KB | |
| 18_door_for_3_trays_abs.123dx | 58.4KB | |
| 18_door_for_3_trays_abs.stl | 472.7KB | |
| 19_door_for_4_trays_abs.123dx | 73.6KB | |
| 19_door_for_4_trays_abs.stl | 1.2MB | |
| 1_groundplate_pla.123dx | 131.4KB | |
| 1_groundplate_pla.stl | 3.2MB | |
| 20_door_latch_pla.123dx | 70.1KB | |
| 20_door_latch_pla.stl | 10.9KB | |
| 21_small_parts.stl | 102.0KB | |
| 2_backplate_pla.123dx | 55.3KB | |
| 2_backplate_pla.stl | 394.9KB | |
| 3_frontplate_abs.123dx | 58.6KB | |
| 3_frontplate_abs.stl | 262.6KB | |
| 4_midplate_abs.123dx | 123.0KB | |
| 4_midplate_abs.stl | 1.3MB | |
| 5_heatplate_bottom_abs.123dx | 55.1KB | |
| 5_heatplate_bottom_abs.stl | 338.0KB | |
| 6_slot_abs.123dx | 56.0KB | |
| 6_slot_abs.stl | 40.1KB | |
| 7_tray_abs.123dx | 84.9KB | |
| 7_tray_abs.stl | 1.7MB | |
| 8_case_bottom_pla.123dx | 83.5KB | |
| 8_case_bottom_pla.stl | 628.7KB | |
| 9_case_spacer_pla.123dx | 78.1KB | |
| 9_case_spacer_pla.stl | 678.6KB |
