When adding salt to the soft water salt port of the dishwasher, you need to take out the frame or pour it in at a 45-degree angle, but I am really too lazy to get it and get some water, so I drew this model, which is also tilted. When adding liquid or something to the hole, it will easily spill out using a normal funnel, or simply cannot be used. Therefore, if necessary, you can print it out. When you need it, it may be too late. Of course, normal holes can also be used, but inclined ones are better.

At this angle, ordinary funnels are really useless. I used to roll a funnel out of paper.

Top view, approximately 45 degrees.

The sides are almost horizontal and it doesn't take up much space when placed.

Side view, the specific size is adjusted according to the bottle mouth, such as the soft salt mouth of the dishwasher. In fact, it is more convenient to print larger. I was anxious to see the printing effect, so I printed it at 100% size by default. It should be better to print at 150% size. .

When printing, the large opening points downward and no support is needed.

洗碗机的软水盐口在加盐时候，需要将框拿出来，或者以一个45度角灌进去，但是真的懒得去拿，搞一手水，所以画了这个模型，同样在这种倾斜的孔加液体或者东西的时候，使用正常的漏斗很容易撒出来，或者干脆没法使用。所以，如果有需要可以打印一个出来，等需要时候打印怕是来不及了。当然，正常的孔也可以用，倾斜的更好用。

这个角度，一般漏斗真用不了，之前我都是用纸卷一个漏斗。

顶视图，大约45度角。

侧面几乎水平，放着也不占地方。

侧视图，具体尺寸按瓶口调整，比如洗碗机的软盐口，其实可以打印更大一些比较方便，我因为着急看打印效果，所以默认100%尺寸打印了，应该150%打印尺寸更好。

打印的时候，大开口向下，无需支撑。