In Desk USB Box (Mouse-Keyboard Cable Management System) 3D Printer Model
The file 'In Desk USB Box (Mouse-Keyboard Cable Management System) 3D Printer Model' is (stl,skp) file type, size is 1.7MB.
The file 'In Desk USB Box (Mouse-Keyboard Cable Management System) 3D Printer Model' is (stl,skp) file type, size is 1.7MB.
Update 09-June-2017: V2 Ditched the 3.5mm Jacks in favour of a fingerprint sensor (https://goo.gl/oZHe32) & Qi Wireless charging
NOTE: Desktops with at least 4cm height is required so it doesn't stick from the bottom.
You will have to cut a square hole in your desk (15x10cm) which it is your choice and your responsibility.
Requires Assembly
Bill of materials:
10x M3x10 screws (the ones that hold the lead can be longer but nor required)
A way to glue the bottom to the main part of the box.
2x 3.5mm Jacks
3x USB Ports
3x USB cables
| box-V2-backplate.stl | 110.0KB | |
| box-V2-bottom.stl | 486.7KB | |
| box-V2-bottom_lid.stl | 294.2KB | |
| box-V2-top.stl | 731.7KB | |
| box-V2-top_lid-qi_catch.stl | 39.4KB | |
| box-V2-top_lid.stl | 349.2KB | |
| box-V2-USB.stl | 96.2KB | |
| usb-box-base.stl | 421.7KB | |
| usb-box-bracket.stl | 281.9KB | |
| usb-box-floor.stl | 28.0KB | |
| usb-box-lead.stl | 98.2KB | |
| usb-box-panel.stl | 430.4KB | |
| usb-box-USB-back-plate-pressure_supportoptional.stl | 601.8KB | |
| usb-box.skp | 4.1MB |
![Rubber Stamp [flexible Filamet] 3D Printer Model](https://cdn.3axis.co/assets/6c/46/bd/d6/6c46bdd6-2aca-4623-9527-d8f7e1a5a145/images/9acbbfe5-172b-418a-baf4-ffac6ce72dfc_thumb.jpg)
