Impurity Seals 3D Printer Model
The file 'Impurity Seals 3D Printer Model' is (stl) file type, size is 17.3MB.
The file 'Impurity Seals 3D Printer Model' is (stl) file type, size is 17.3MB.
Cosplay and accessory sized "impurity" seals for each of the Chaos Gods. Should be just the right size for attaching pins and adding your own seal parchment
Main seal body is 40mm across and 6mm high. The outer fringes can go up to a total of 53mm
Highly recommend printing at 0.1mm or as fine as you can get if using FDM
Included seals:
Chaos Undivided
Khorne
Slannesh
Tzeench
Nurgle
CSKT
| Chaos_Undivided_Seal.stl | 12.1MB | |
| CSKT_Seal.stl | 9.8MB | |
| Khorne_Seal.stl | 3.5MB | |
| Nurgle_Seal.stl | 10.6MB | |
| Slaanesh_Seal.stl | 6.4MB | |
| Tzeench_Seal.stl | 6.6MB |
