Improved Piggyback ISP – On The Fly DIP-Dupont Connector 3D Printer Model
The file 'Improved Piggyback ISP – On The Fly DIP-Dupont Connector 3D Printer Model' is (stl) file type, size is 298.2KB.
The file 'Improved Piggyback ISP – On The Fly DIP-Dupont Connector 3D Printer Model' is (stl) file type, size is 298.2KB.
Use this quick print adapter to connect male Dupont pins to a DIP-packaged IC on the fly.
I mainly use them to program Atmel AVR chips
but there's many other uses.
This is an improved version of my original design. The dupont pins attach more firmly to the adapter and are pushed more firmly against the DIP chip pins, while the adapter detaches more easily from the chip. Makes it much easier to have permanent adapters for different scenarios.
Designed to print lying on the side with a small layer height (0.12 mm). No(!) supports, no bridging.
| Piggyback_v5_improved-piggyback_14pin.stl | 104.6KB | |
| Piggyback_v5_improved-piggyback_16pin.stl | 117.1KB | |
| Piggyback_v5_improved-piggyback_20pin.stl | 142.1KB | |
| Piggyback_v5_improved-piggyback_28pin.stl | 777.0KB | |
| Piggyback_v5_improved-piggyback_8pin.stl | 67.1KB |
