Improved Linear Chain To Extruder On Anet A8 3D Printer Model Free Download

Description Files (12)

Summary

Hi, unfortunately I no longer publish designs on Thingiverse.
But feel free to have a look at my profile at Printabled.com: https://www.printables.com/de/social/335893-starwhooper/about

There I will continue to maintain my designs and also publish completely new ones.
I have also published several of my designs there in file format for OpenSCAD. This allows you to adapt them better to your personal needs.

The original doesn't fit on my Anet A8. So I remix my own one.

extruder end:
• add hole for extruder motor wire
• extruder could now opened to replace filament
• remove upper spacer
• reduce elements
• enlarge size deep to reduce collusion from filament and change

change pieces:
• remove upper spacer
• reduce elements
• optimize holes for cable tie (the cable tie replace the upper spacer)
• create a long and a mix size chain piece

z-motor end:
• make is 2cm smaller (otherwise collusion with z-axe may happen end)
• remove upper spacer
• reduce elements
• enlarge size deep to reduce collusion from filament and change
• !!!wire will get more space in next version!!!

I use 22 of the short ones and one of the mid one. If you use the long one, you can reduce the count of the small pieces.

You can see it live here: https://www.youtube.com/watch?v=5MAc2GZp70M

Please note the 4 different ways to "close" the upper space of the pieces.

totally closed, zip tie needs to destroy if you want remove it.
zip tie is fixed, but could open if you want add/remove a line.
zip tie is only jammed and could open/remove so often you want.
zip tie can easy remove, but please use it only to test.
Thank you to Klownius (http://www.thingiverse.com/make:287726), he offer me the idea to use the zip ties on a less wasting way. You will find a picture for better understanding below.

changepiece_v201611221538_4x.skp	319.0KB
changepiece_v201611221538_4x.stl	1.2MB
extruder_end_v20161213_1041.skp	138.6KB
extruder_end_v20161213_1041.stl	403.6KB
long_changepiece_v20161127_2107.skp	106.0KB
long_changepiece_v20161127_2107.stl	373.7KB
mid_changepiece_v20161129_1023.skp	97.3KB
mid_changepiece_v20161129_1023.stl	296.1KB
mid_changepiece_v20170206_2151.skp	94.0KB
mid_changepiece_v20170206_2151.stl	312.0KB
z-motor_end_v20161213_1012.skp	107.0KB
z-motor_end_v20161213_1012.stl	383.2KB

Improved Linear Chain To Extruder On Anet A8 3D Printer Model

Summary

Tags

You might also like