Improved Fidget Twister 3D Printer Model
The file 'Improved Fidget Twister 3D Printer Model' is (stl) file type, size is 34.7MB.
The file 'Improved Fidget Twister 3D Printer Model' is (stl) file type, size is 34.7MB.
The biggest improvement over other designs is that it spins freely on a pole. Another innovation is a tapered hole so the pole can be joined together with a short length of filament, no glue is necessary.
Designed with tight tolerances, you may have to sand/file parts if the fit is too tight. I use a rat tail file in the center of the twist part and the inside edges of the nut until the parts move freely. There are 2 versions, long and short. A piece of filament is used to join the pole together. The holes in the pole are tapered, test fit a 37mm max length piece of filament and trim until it is the correct length to join the pole together.
The nut comes in 2 versions, tight and loose. With tight I work the pieces together until they loosen up.
Recommend Cura slicer settings: 50% gyroid infill, 0.2 layer height, adaptive layers, brim build plate adhesion. Walls: z seam alignment: sharpest corner
Printed on Ender 3S1, Gnvtntp Tri-Color Coextrusion Silk Red-Green-Blue Filament and Geeetech Silk silver.
| LONGpole.stl | 4.1MB | |
| LONGtwist.stl | 21.8MB | |
| SHORTpole.stl | 4.1MB | |
| SHORTtwist.stl | 17.8MB | |
| twistnutloose.stl | 18.4MB | |
| twistnuttight.stl | 18.2MB |
