Imperial Dropship The Mandalorian Season 2 3,75″/6″/Legion 3D Printer Model
The file 'Imperial Dropship The Mandalorian Season 2 3,75″/6″/Legion 3D Printer Model' is (stl) file type, size is 11.5MB.
The file 'Imperial Dropship The Mandalorian Season 2 3,75″/6″/Legion 3D Printer Model' is (stl) file type, size is 11.5MB.
BY DOWNLOADING THE FILES FROM THINGIVERSE YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS:
The files are for private use only!
You are allowed to print parts from them for your personal use only!
You are not allowed to use this files or parts you printed with the use of this files of it in any comercial way!
If you are distributing Pictures from parts or models you build with theses files you are only allowed to to so if you are declaring the source of the design. You have to add a link to this thingiverse-thing in the description of your Fotos!
You are not allowed to copy or distribute them in any way!
You are not allowed to sell them or parts you printed from them or models you build with the use of this files!
[update 21.6.21: Corrected a little problem with a thin wall in Body middle and Body middle A/B and uploaded new files ]
[update 18.6.21: As the body middle takes over a day to print I split it in two parts, so print either the Body middle part (32h) or the Body middle A (18h) and Body middle B (16h). Don´t print both versions! ;-)]
This is a imperial dropship fan sculpt of the ships seen in the mandalorian season 2.
The imperial dropship is a small landing craft for up to 6 stormtroopers.
Printing instructions:
The parts are for 3,75" figures, print at 150% for 6" and at 50% for Legion scale
Print the 3 body parts standing upright on the bed, no supports needed. Print the flat parts (panels, cover, ramp laying flat, use the lay flat option in Curamaker. Always print without supports, except of the gun barrels. If the file name contains a number followed by an x this is the number how often you have to print the part, all other parts are only needed once. FFollow the assembly picture how to assemble the parts snd where to glue the parts together and where not.
| Body_back_-_Kopie.stl | 1.7MB | |
| Body_Cover_-_Kopie.stl | 11.6KB | |
| Body_Front_-_Kopie.stl | 884.6KB | |
| Body_middle.stl | 16.0MB | |
| Body_middle_A.stl | 6.4MB | |
| Body_middle_B.stl | 9.8MB | |
| Cockpit_Panel_-_Kopie.stl | 192.5KB | |
| connectors_-_Kopie.stl | 2.4KB | |
| Gun_2x.stl | 340.3KB | |
| Gun_2x_-_Kopie.stl | 340.3KB | |
| Gun_Barrel_4x.stl | 118.3KB | |
| Imperial_Logo_2x.stl | 142.3KB | |
| Locker.stl | 4.0KB | |
| Panel.stl | 1.6MB | |
| Pilot_cover.stl | 855.2KB | |
| Pilot_Seat.stl | 1.8MB | |
| Ramp.stl | 858.1KB | |
| Ramp_Holder_2x.stl | 203.7KB | |
| Seat_6x.stl | 181.1KB | |
| Seat_Back_6x.stl | 574.8KB |
