Illuminated Lantern 3D Printer Model
The file 'Illuminated Lantern 3D Printer Model' is (stl) file type, size is 12.2MB.
The file 'Illuminated Lantern 3D Printer Model' is (stl) file type, size is 12.2MB.
This is a lantern that can also be illuminated. It's a pretty large model.
DO NOT scale down or the threads potentially won't work and the light socket definitely won't fit!
No supports are required. Use an inner brim on the Lantern Top.
There is a hole on the back of the body that allows a 12VDC barrel connector to be epoxied in.
If you do not want to illuminate the lantern the "Lantern - Socket T10 AMZ B07FSK5LTH" file is not required.
If you want to install the light use the following parts:
T10 Light Bulb Socket: https://www.amazon.com/dp/B07FSK5LTH
Light Bulb: https://www.amazon.com/dp/B002CYQ5N8
Barrel Connector: https://www.amazon.com/dp/B0D5H4DZTJ
Print the body, top and base out of something darker that won't allow light to shine through.
The "Window Glass" should be made of yellow or whatever color light you want to shine through.
The model shown was printed using ABS and a .16mm layer height.
Please Like and upload a make!
If you like illuminated designs see the Party Light Collection: https://www.thingiverse.com/thing:6843408
| Lantern_-_Base.stl | 426.4KB | |
| Lantern_-_Base_Screw_2x.stl | 1.2MB | |
| Lantern_-_Body.stl | 16.4MB | |
| Lantern_-_Glass.stl | 300.7KB | |
| Lantern_-_Socket_T10_AMZ_B07FSK5LTH.stl | 724.1KB | |
| Lantern_-_Top.stl | 10.6MB |
