Ikea Trådfri EU Light Switch Cover (Tradfri) 3D Printer Model
The file 'Ikea Trådfri EU Light Switch Cover (Tradfri) 3D Printer Model' is (stl) file type, size is 523.4KB.
The file 'Ikea Trådfri EU Light Switch Cover (Tradfri) 3D Printer Model' is (stl) file type, size is 523.4KB.
Recently I have changed all lightbulb at my home to Ikea Trådfri. After this change I have left with two problems: where to put remotes when they are not used and how to prevent other people from turn off light using old switch. To solve both of this problems I have designed this cover that should be suitable for most of light switches over Europe. Now remotes for lights are in place of old light switch and everyone that is used to old way of turn off light is clicking them automatically.
Only thing that can't be printed and is required to hold remote is place is strong neodymium magnet 10mm diameter and 5mm height. In middle there is place prepared for it. It should easily fit in it and keep there firmly.
This model was optimized to print on 0.4mm nozzle. Also cover is mostly hallow so it require small amount of filament. My last print required only 5.5m of filament.
| Ikea_Tradfri_EU_Switch_Cover_v1.stl | 1.4MB |
